Vent Extension Kit to suit Poly Fuel Tank (2m Hose & Fittings).
Replacement Vented Screw on Cap to suit most Poly Fuel Tanks.
Fuel Hose & Fuel Tap Kit 1.5m to suit Universal Poly Fuel Tanks.
Filler Neck for Diesel Tank (Black-Red).
Vent Kit for Poly Diesel Tanks, includes hose, fittings, hose clamps and filter.
Filler Kit to suit FTP45FV & FTP60FV Diesel Tanks (Includes Filler Neck-Elbow-Clamps).
Poly Diesel Tank 58 Lt Rectangular Universal Fitment in either Vertical or Flat Position - for Ute Tray or Wagon Floor mounting.
Requires separate filler kit.
This tank comes with nutserts installed. These are not...
Poly Diesel Tank 50 Lt Taper Rectangular Universal Fitment - for Ute Tray or Wagon Floor mounting.
Dimensions: 1000mm W x 350mm H (30mm for cap)
Depth tapers from 200mm at the base to 150mm at the top.
The brass outlet...
Poly Diesel Tank 42 Lt Vertical with wheel arch cut-outs. (Dual Cab Ute or Wagon Mounting)
Dimensions: 1295mm W x 600mm H (30mm for cap) 75mm thick. The cut out each side is 200mm W x 300mm H. An additional small rebate...
Poly Diesel Tank 45Lt Vertical or Flat Mount Option. (Dual Cab Ute or Wagon mounting)
Requires separate filler kit.
This tank comes with nutserts installed. These are not designed to hold the full weight of the tank but can assist in...
Poly Diesel Tank 40 Lt Footwell Shape (twin outlets) Yellow colour.
Dimensions: 1200mm W x 190mm H ( 30mm for cap) & 250mm Deep.
The transmission tunnel recess is 420mm wide at the base tapering to 200mm wide at top of recess, and is 110mm high...
Vent Kit for Poly Water Tanks
Includes hose, fittings, hose clamps and filter.
Electric Water Pump 12v to suit BOAB water tanks 3.8lpm 12v 2.5amp 35PSI cut-off.
10mm Hose Kit 2m long for use with 12v Electric Water Pump.
Comprises: 2m of 10mm reinforced hose, 5 clamps, 3 tail fittings and a mini ball valve.
12mm Hose Kit 1.5m long with Tap & Clamps to suit all BOAB water tanks.
Filler Neck for Water Tank.
Filler Kit to suit WTP45FV & WTP60FV Water Tanks.
Includes: Filler Neck, Elbow and Clamps.
Filler Screw Cap and Flange to suit most Poly Tanks.
Can be fitted into Poly Tanks as an additional or alternative filler.
Requires: a 40mm hole be cut in the desired location. Then insert new filler with sealant and screw into place using self tap...
Replacement Screw on Cap to suit most Poly Tanks - with Security Clip.
Replacement Screw on Cap to suit BOAB Poly Tanks.
Poly Water Tank 80Lt Flat Under Ute or Truck Tray Mount.
The filler uses a 1.5" BSP thread with an adjacent 1/2" BSP insert to attach a fast fill breather line if necessary. Two 1/2" BSP outlets are fitted on the bottom to give a choice of exit to the...
New Design 58Lt Rectangular Universal Poly Water Tank with recessed outlets for optional mounting in Vertical or Flat Position. 1/2'' BSP brass outlet. Requires separate filler kit.
This tank comes with nutserts installed. These are not designed to hold...
Poly Water Tank 55Lt Ute or Roof Rack Mounting.
All BOAB Poly Tanks are BPA free
Designed to withstand 4WD and offroad conditions and made from food grade polyethylene these hard wall tanks do not taint the taste of water and can...
Poly Water Tank 50Lt Taper Rectangular Universal for Behind Seats etc. 1/2'' BSP brass outlet.
Dimensions: 1000 W x 350 W (30mm for cap). Depth varies from 200mm at the base to 150mm at the top.
Brass outlet uses 1/2" BSPT thread to allow normal...