Dimensions: 1000 W x 350 W (30mm for cap). Depth varies from 200mm at the base to 150mm at the top.
Brass outlet uses 1/2" BSPT thread to allow normal hardware plumbing fittings to be used for custom hose or pump kits.
Or you may prefer to order our Hose or Pump Kits.
All BOAB Poly Tanks are BPA free
Designed to withstand 4WD and offroad conditions and made from food grade polyethylene these hard wall tanks do not taint the taste of water and can be easily cleaned should it be necessary to top up with brackish water at any time.
Tip: When filling a water tank use only drinking water grade hose (not a common garden hose), or else you are adding tainted water to start with!
Cleaning/Storage: Water in any type of small tank (Stainless Steel or Poly) will get stale and have a taint to the taste over a period of time. Tanks are best stored completely dry. Tanks should be cleaned periodically and we recommend using "Milton" ( baby bottle washing compound).
If a bad taste persists use Bi-Carb of Soda to flush out the tank and repeat as necessary.
Capacity: Poly tanks are roto-molded using an oven. Tanks cool at different rates depending on the time of year and this can lead to different levels of shrinkage - thus to small variances in capacity between the same model of tank. Stated capacities are approximate.
Width: 200mm
Depth: 1000mm
